PENINGKATAN EFISIENSI PROSES PENGERINGAN KAYU DAN BLOK PUPUK MENGGUNAKAN PENGERING BERBASIS SIKLUS KOMPRESI UAP

Petrus Kanisius Purwadi, FA Rusdi Sambada, Iswanjono Iswanjono, Budi Sugiharto, Yosef Agung Cahyanta, Wibowo Kusbandono

Abstract


The wood-furniture drying process in the industry using wood fuel is deemed inefficient, wasteful, takes a long time, is unsafe, impractical, and not environmentally friendly. Furthermore, the process of drying fertilizer blocks with the sun, apart from requiring a large area of land, also cannot be carried out in the rainy season. This service is carried out in two industrial partners, namely CV Nuansa Kayu Bekas in Sragen and PT Wira Cahya Pratama in Klaten. This service aims to increase understanding of an effective drying machine for the drying process of wood furniture and block-fertilizer in the industry by using a vapour compression cycle. In addition, to increase productivity and profits in the industry. The training venues are conducted in the industries of the two partners. Activities in this service include training on drying machines and assistance in the manufacture, operation and maintenance of effective dryers, especially for the wood-furniture and fertilizer-block industries. The implementation of the service has been going well and smoothly. The outputs produced are activity videos, publications in Suara Merdeka newspaper, Jogja Daily and the Sanata Dharma University website, service articles published in service journals, and Partner satisfaction surveys.


Keywords


drying machine, vapour compression cycle, wood furniture, fertilizer block

Full Text:

PDF

References


Darni, Y., Utami, H., & Sulistyanti, S. R. (2020). Penerapan alat pengering untuk peningkatan efisiensi, 4(3).

Indriani, A., Witanto, Y., & Hendra, H. (2019). Pembuatan Alat pengering berputar (rotary) kopi dan lada hitam menggunakan mikrokontroler arduino uno Desa Air Raman Kabupaten Kepahiang Propinsi Bengkulu. Dharma Raflesia : Jurnal Ilmiah Pengembangan Dan Penerapan IPTEKS, 17(1), 64–76. https://doi.org/10.33369/dr.v17i1.6197

Karya, J. K. P. J., Vol, P., April, N., Sutanto, R., Mulyanto, A., Catur, A. D., & Wirawan, M. (2019). Pengering hybrid dodol nangka dodol nangka terbuka luas, 1(2), 65–70.

Rahayuningtyas, A., & Kuala, S. I. (2016). Pengaruh suhu dan kelembaban udara pada proses pengeringan singkong (Studi kasus: Pengering tipe rak). ETHOS (Jurnal Penelitian Dan Pengabdian), 99. https://doi.org/10.29313/ethos.v0i0.1663

Suhartini, Y., Indriani, A., Studi, P., Mesin, T., Teknik, F., Bengkulu, U., Studi, P., Elektro, T., Teknik, F., Bengkulu, U., Studi, P., Industri, T., Teknik, F., & Mercubuana, U. (2017). Pembuatan mesin pengering kelapa menggunakan manufacture coconut drying machine using renewable energy sources to increase the income community of Pondok Kelapa Central Bengkulu, 61–72.

Teri, I., Di, K., Ponrang, K., & Luwu, K. (2018). Penerapan teknologi alat pengering ikan bagi kelompok pengusaha, 2018, 225–229.

Triwahyudi, S., Suratmo, B., Rahardjo, B., & Nelwan, L. O. (2016). Pemodelan matematik kinerja pengering surya efek rumah kaca (ERK) - Hibrid menggunakan rak berputar secara vertikal. Jurnal AGRITECH, 36(3), 352–361.




DOI: https://doi.org/10.24071/aa.v5i1.4011

Refbacks

  • There are currently no refbacks.


 

 

Indexed and abstracted in:

   

e-ISSN: 2620-5513; p-ISSN: 2620-5505

Altruis Sertifikat Sinta 5 (S5 = Level 5)

Bersama ini kami informasikan bahwa Abdimas Altruis: Jurnal Pengabdian Kepada Masyarakat telah terakreditasi nasional Sinta 5 oleh Kementerian Pendidikan, Kebudayaan, Riset dan Teknologi Republik Indonesia berdasarkan surat keputusan No.Surat Keputusan 0547/E5 /DT.05.00/2024. Masa berlaku 5 tahun : Vol 4 No 1 Tahun 2021 s/d Vol 8 No 2 Tahun 2025.


Abdimas Altruis: Jurnal Pengabdian Kepada Masyarakat diterbitkan dua kali setahun, yakni pada April dan Oktober, oleh Lembaga Penelitian dan Pengabdian Kepada Masyarakat, Universitas Sanata Dharma, Yogyakarta, Indonesia.