Design and Development of a Path-Tracking System Based on Radio Frequency Identification Sensor for Educational Toy Robot (EDOT)
(1) Politeknik Mekatronika Sanata Dharma
(*) Corresponding Author
Abstract
This paper offers the design and development of a path-tracking system based on Radio Frequency Identification (RFID) sensors. This Path-tracking system will be used as a navigation system on EDOT. The EDOT requires a navigation system because it must be able to drive from the starting point to the predetermined end point automatically. This path-tracking system uses RFID sensors to detect RFID cards which have been arranged as a path. And then the EDOT will pass through the path consisting of some RFId cards. EDOT is a solution of a previous system, called Line-Follower, which uses infrared as a sensor to detect lines to guide a robot to go towards its destination point. The path-tracking system used by EDOT can work more efficiently in detecting the path to be traversed than other robots using the line follower system with infrared sensors or LDR (Light Dependent Resistor).
Keywords: path-tracking, RFID, EDOT, robotFull Text:
PDFReferences
References
Demetriou, G. A. (2011). Mobile Robotics in Education and Research. In Z. Gacovski, Mobile Robots-Current Trends (pp. 27-48). InTech.
Imbiri, F. A., Taryana, N., & Nataliana, D. (2016). Implementasi Sistem Perparkiran Otomatis dengan Menentukan Posisi Parkir Berbasis RFId. ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol. 4 No. 1, 31-46.
Janis, D. A., Pang, D., & Wuwung, J. O. (2014). Rancang Bangun Robot Pengantar Makanan Line Follower. e-journal Teknik Elektro dan Komputer, 1-10.
Prabowo, Y., & Hepy, S. (2011). Line Follower Robot Berbasiskan Mikrokontroler ATMEL 16. Jurnal Ilmiah BIT, 44-52.
Sparkhojayev, N., & Guvercin, S. (2012). Attendance Control System based on RFID-technology. IJCSI International Journal of Computer Science Issues, Vol. 9, Issue 3, No 1, 227-230.
DOI: https://doi.org/10.24071/ijasst.v1i2.1879
Refbacks
Publisher : Faculty of Science and Technology
Society/Institution : Sanata Dharma University
This work is licensed under a Creative Commons Attribution 4.0 International License.